More zoe

Zoe

ZZN!

zoe, 8 lbs, 12 oz (yes, you read that right) was born at 16:06 by C section. The mother and daughter are both doing great. Thanks for everyones support!

c section scheduled

thanks everyone! Chloe is doing a lot better now and pushing like a champ!

the epidural

after 57 hours of labor, Chloe was just in too much pain to continue without an epidural. They put it in a little while ago and Chloe is sleeping now. Wish us luck!

epidural just went in

Back at hospital

6 cm 100% effaced. We are getting admitted!

leaving for hospital

just called the hospital

And they recommended staying home for as long as possible. Unfortunately, the lower dose of morphine hasn't really helped chloe this time and she hasn't been able to sleep.

mmmm dopo takeout

no speck pizza tonight though :(

going home again

only 3.5 cm

back to the hospital

we're heading back to the hospital in ten minutes again

stiiiiill @home

contractions are longer but nothing new to report

still @home

Chloe got some sleep, thanks to the morphine.

Coming back from the hospital!

Only 2 cm. It should happen today though

going to the hospital!

Climbing wall 3

last update for a while...

put on some final panels (The bottom ply and some nice diagonal pieces)



and gave it a try:

panel 2

After convincing my neighbor Tom to give me a ride to Economy Lumber in exchange for some 2x4s and beer, I installed my carefully calculated diagnoal supports and framing. Next came the attachment of the plywood with anti slip paint and T-nuts ( I also found a good source of them: 50 for $12 at a place just down the street from us).



With the trip to the lumber yard, this took the better part of two hours, which got me in roughly under the 6:30 "quiet time" deadline at the macaroni factory. I painted another sheet of ply and then installed the campus rungs... they're way too positive, so I might flip them upside down or something.


I still don't really have many holds, but I added a few holds to bridge the gap between the 19 degree wall and 50 degree walls and gave it a try



And chloe couldn't resist a dead hang too!

Here is the present state. The upper sheets are each standard 8x4 foot CDX 3/4 inch ply.

Still to be done:

side panel(s)
lower panel for footholds
buying of non-boring shapes

so far my favorite shapes are from soillholds.com and stoneageclimbing.com Strangely, despite the fact that Touchstone Climbing (The owner of our gym) also owns Stone Age, they don't sell Stone Age holds in their pro shops! Arrrgh. I covet those Echo Stones!!!

Climbing Wall

Because I foresee fewer visits to the gym in the coming months, I finally decided to buckle down and start building a home wall. Also, when will we ever have 12 foot ceilings again? I cajoled Paul to come by and help plan and build the wall -- thanks man! The most time consuming part was just anchoring the damn base board into the cement: the guy at Economy Lumber steered us wrong on the correct masonry bit size. After another visit to the lumber yard (Ashby Lumber this time), we got bigger bolts and the base board is now very solidly attached to the floor via 1/2 inch expansion bolts. Paul and I managed to get the basic frame, as well as one diagonal support up yesterday. Between yesterday evening and tonight I put in some cross bracing, painted the plywood sheets (I added some anti skid silica to the paint for roughness) and screwed two panels into the framework. I got the plywood sheet up with the help of our neighbor and some clever clampwork -- that guy has some cool tricks up his sleeve! There's still a decent amount of work to be done, but I couldn't resist bolting some holds on and taking it for a spin. It's very solid with no perceptible flex so far. Next comes the second panel. Before I do that, I need to find a cheaper source of T-nuts though.

yesterday:

Today (added cross bars)

The tape measure in my hand somehow lost a chunk of steel, turning it into a spring loaded finger slicing razor blade.


Note the clamped 2x4 under the overhang and the pushing device to the right. The trick is to clamp the 2x4, slide the plywood sheet into the small gap, then push the sheet up with the pusher. Once up, the pusher braces the sheet against the ground. Smart, but I liked my idea of getting enraged, turning into The Hulk, and throwing the plywood sheet into place better. Next time.


Sheet up, holds on:


First vertical section screwed on: